Tag Archive for 'German'

Page 2 of 45

Pz. Jäg. 38 für 7.5 cm Pak 40/3 (Sd. Kfz. 138): S.P. Antitank Gun (on Czech Chassis)

Pz. Jäg. 38 für 7.5 cm Pak 40/3 (Sd. Kfz. 138): S.P. Antitank Gun (on Czech Chassis)

The equipment consists of the 7.5 cm Pak 40 mounted on a turretless chassis of a Pz. Kpfw. 38 (t) tank of Czech origin, formerly known as the L.T.H. This mount was used by the Germans in large numbers on the Russian front. It usually moves just in the rear of the first wave of tanks. Its road performance approximates that of the Pz. Kpfw. 38 (t) tank.

Due to the bolted construction of the parent vehicle the removal of the turret, superstructure top plate and the engine access hatches of the original tank is readily accomplished and the mounting of the anti-tank gun is speedily performed. The turntable of the anti-tank gun is bolted to the angle section formerly carrying the superstructure top plate of the original tank. The gun shield is constructed from 10-15 mm plate. It is open at the top and rear. The protection afforded the crew is little better than would be found on a field piece.

The gun, which projects well beyond the front of the hull, is of monobloc, loose barrel construction, and is fitted with a double baffle muzzle brake. The breech ring is rectangular and is secured to the barrel by a loose screwed collar. The recoil mechanism is attached underneath the ring by a detachable lug. The elevating and traversing mechanisms are controlled by hand wheels. The gun has the following muzzle velocities: HE 1800 f.s.; A.P.C., 2525 f.s; hollow charge 1476 f.s. The A.P.C. shell will penetrate homogeneous armor as follows: 500 yards 4.0 ins. at 30° obliquity, 4.8 ins. normal—1000 yards 3.6 ins. at 30°, 4.3 ins. normal—2000 yards 2.8 ins. at 30°, 3.4 ins. normal—2500 yards 2.5 ins. at 30°, 3.0 ins. normal. The gun has a traverse of 65° and an elevation of -5° to + 22°.

SPECIFICATIONS

Weight         (approx.) 11 tons
Length 15 ft., 3 ins.
Width 7 ft.
Height 7 ft., 2 ins.
Ground clearance 15 ins.
Tread centers 5 ft., 9 1/2 ins.
Ground contact 8 ft., 6 3/4 ins.
Width of track 11 ins.
Pitch of track 4 1/2 ins.
Track links 89 ins.
Fording depth 3 ft.
Theoretical radius of action
     Roads 140 miles
     Cross-country 100 miles
Speed
     Roads 25 m.p.h.
     Cross-country 15 m.p.h.
Armor
     Front plate 25 + 25 mm
     Sides 30 mm
Armament 7.5 cm. Pak 40
M.G. 37 (t)
Ammunition (rds.)
Engine Praga 6-cyl., 125 h.p., gasoline
Transmission 5 speeds forward, 1 reverse
Steering Epicyclic clutch brake
Crew Probably 4

German: p. 19

Sturmgeschüz 10.5 cm Stu. H. 42 (Sd. Kfz. 142/2): S.P. Assault Gun

Sturmgeschüz 10.5 cm Stu. H. 42 (Sd. Kfz. 142/2): S.P. Assault Gun

The vehicle is a combination of the Pz. Kpfw. III tank chassis and the 10.5 cm l.F.H. 18 (M) with muzzle brake.

The squat superstructure which replaced the turret of the original tank is similar to the Stu. K. 40. Motor, track, and other chassis mechanisms are the same as those in the standard Pz. Kpfw. III tank and its performance should nearly approximate that vehicle.

The howitzer, Stu. H. 42, is identical to the 10.5 cm l.F.H. 18 (M), except that the former is electrically fired and has the following radius of movement: traverse 20°; elevation -6° to +20°. The piece has a length of 115.75 inches excluding the muzzle brake, which is approximately 15 inches in length. The weight of the gun and cradle is 1.7 tons. Firing a long range shell with supercharge, its muzzle velocity is 1,770 f.s. and its maximum range is 13,480 yards. It fires the 32.6 lb. H.E. shell, a long range H.E. shell, a 32.51 lb. smoke shell, a 25.9 lb. hollow charge shell, and an H.E./incendiary shell.

Auxiliary armament consists of 2 machine pistols, 18 egg grenades, and 1 signal pistol. There are no coaxially mounted or free-mounted machine guns.

The Germans have recently begun attaching thin skirting armor plate of from 5 mm to 8 mm thickness on various fighting vehicles, including the Sturmgeschütz. The following theories have been advanced for this development: (1) to break up or deflect 20 mm tungsten carbide core ammunition; (2) to defeat hollow charge shells; (3) to defeat the 14.7 mm Russian antitank rifle; (4) to defeat the American Bazooka.

SPECIFICATIONS

Weight         27 tons
Length 17 ft., 9 ins.
Width 9 ft., 8 ins.
Height 6 ft., 5 ins.
Ground clearance 14 ins.
Tread centers 8 ft., 2 1/2 ins.
Ground contact 9 ft., 4 1/2 ins.
Width of track 15 ins.
Pitch of track 4 3/4 ins.
Track links 90
Fording depth 3 ft.
Theoretical radius of action:
     Roads 100 miles
     Cross-country 60 miles
Speed:
     Road 25 m.p.h.
     Cross-country 15 m.p.h.
Armor:
     Front plate 50 + 30 mm
     Sides 30 mm
Armament 10.5 cm LF.H. 18 (M)
2 M.P.’s
Ammunition 10.5 cm gun—75 rds.
Engine Maybach, HL 120 TRM, V-12, 320 hp.
Transmission:
     Clutch Multiplate, dry.
     Gear box Synchromesh, manual control, 6 speeds forward, 1 reverse.
     Final drive Spur reduction gear.
Steering Epicyclic, clutch brake
Crew 4

German: p. 29

Pz. Kpfw. IV Aus. F1, F2, G, H, K (Sd. Kfz. 161): Medium Tanks

Pz. Kpfw. IV Aus. F1, F2, G, H, K (Sd. Kfz. 161): Medium Tanks

Model F—The hull, superstructure, and turret, as in all other known models of the Pz. Kpfw. IV, is of welded construction. The basic frontal armor, including superstructure and turret of Model F, was increased to 50 mm; on the sides to 30 mm. The main hull superstructure projects over the top of the tracks, providing additional stowage space and a wide base upon which to mount the turret. The turret floor is carried by brackets from the turret ring and consequently rotates with the turret.

The suspension consists of 4 bogie assemblies, each fitted with two rubber-tired bogie wheels 18 1/2 inches in diameter on each side, with a quarter elliptic spring anchored beneath the leading axle arm of each assembly. There is a front sprocket, the spokes of which are bent outward from the hub cap giving the outside a dished appearance, a rear idler which has 7 spokes instead of 8 as in previous models, and 4 return rollers.

The power plant consists of a Maybach HL 120 TRM, V-12 O.H.V., 4-stroke, gasoline engine, rated 320 B.H.P. at 3,000 r.p.m.

The armament consists of a 7.5 cm Kw. K., 24 cals. in length, a coaxial 7.92 mm MG 34 mounted in the turret, and a 7.92 mm MG 34 at the right of the front plate of the superstructure.

Model F2—Same as Model F except that it carried the initial experimental mounting of the Kw. K. 40, 43 cals. in length.

Model G—Produced in 1942. Same as Model F except that the mounting of the Kw. K. 40 was continued. The gun was fitted with a double baffle muzzle brake.

Models H, K—These models are referred to in German documents published during 1943.

SPECIFICATIONS

Weight         26 tons
Length 19 ft., 4 ins.
Width 9 ft., 7 ins.
Height 8 ft., 6 ins.
Ground clearance 15 ins.
Tread centers 7 ft., 11 ins.
Ground contact 11 ft., 6 ins.
Width of track 15 ins.
Pitch of track 4 3/4 ins.
Track links 98
Fording depth 3 ft.
Theoretical radius of action:
     Roads 130 miles
     Cross-country 80 miles
Speed:
     Road 28 m.p.h.
     Cross-country 15 m.p.h.
Armor:
     Front plate 50 mm
     Sides 30 mm
Armament 7.5 cm Kw. K. 40
2 MG’s 34
Ammunition 7.5 cm gun—87 rds.
MG’s—2,250 rds.
Engine Maybach HL 120 TRM, 320 hp.
Transmission Synchromesh—6 speeds forward, 1 reverse.
Steering Epicyclic, clutch brake
Crew 5

German: p. 32

2 cm Flak 38: A.A./A.T. Gun

2 cm Flak 38: A.A./A.T. Gun

The Flak 38 was introduced in 1940 to replace the 2 cm Flak 30. Its performance does not differ materially from that of the earlier weapon, except for a higher cyclic rate of fire of 450 rounds per minute.

The gun is operated by short barrel recoil and the residual pressure of gas in the barrel. Recoil unlocks the breech and imparts rearward acceleration to the breechblock carrier. This rearward acceleration is assisted by gas pressure after unlocking has been completed so that the breechblock travels back with sufficient force to perform the operations of extraction, ejection, and compression of the return spring.

The energy required for closing the breech and carrying a fresh round to the chamber is provided by the return spring, assisted at first by the buffer spring.

The breechblock is of the Solothurn type. Any tendency toward rebound is counteracted by the impact of an inertia block at the end of the forward movement. The barrel has resistance rings which brake the recoil and forward movements of the barrel; a buffer and buffer spring arrest the backward movement of the breech block.

This weapon may be adjusted for either semi-automatic or full-automatic fire. It is fired by a foot pedal. Cartridges are fed from a 20-round curved box magazine hinged on the left of the gun.

The mounting consists principally of the base, cradle, traversing and elevating gears, firing mechanism, and lighting equipment.

Traverse is 10° per turn of handwheel in fine gear and 30° in coarse gear; rate of elevation or depression is 4° per turn in fine gear and 12° in coarse gear.

The weapon, which is transported on a trailer, may be mounted on railways cars or road vehicles. When traveling over difficult country, gun and mounting may be split into six loads.

SPECIFICATIONS

Caliber         20 mm (.79 in.)
Length of tube
Weight (travelling position) 1,630 lb.
Weight (firing position) 924 lb.
Length (travelling position) 157 ins.
Height (travelling position) 67 ins.
Height (firing position) 30 ins. mounted flush
Width (overall) 71 ins.
Width of trail spread
Length of bore 44 ins.
No. of grooves
Width of grooves
Depth of grooves
Width of lands
Muzzle velocity (HE shell) 2,950 f.s. (A.P. shell)
2,624 f.s.
Max. range (horizontal) 5,246 yds.
Max. range (vertical) 4,012 yds.
Rate of fire 220 rds. (practical), 450 (theoretical)
Traverse 360°
Elevation +90°
Depression -20°
Length of recoil
Ammunition H.E. four types; A.P. two types
Wt. of 1 magazine of 20 rds 21 lb.

German: p. 136

2 cm Flak 30: Antiaircraft Gun

2 cm Flak 30: Antiaircraft Gun

The Flak 30 was the principal armament of German light antiaircraft units since the beginning of the war in Europe until the introduction of the 2 cm Flak 38 and 2 cm Flak 38 Vierling. The gun, which may be mounted on road or railway vehicles, is normally transported on a single-axle trailer which is drawn by either horse or motor vehicle. It is usually fired with its mounting on the ground and with the trailer removed. However, it can be fired from the trailer at both ground or aerial targets in emergencies.

This recoil-operated weapon is fed by a flat 20-round box magazine. The trigger mechanism is pedal-actuated; operation is either full-automatic or semi-automatic.

The barrel slides in the body with the barrel extension. A combined muzzle brake and flash eliminator is screwed to the muzzle and retained by a catch. The barrel extension is slotted on the right and left sides for ejection and feed respectively.

The body is formed to receive the barrel extension, which is hinged near the rear end of the body. The barrel return spring, buffer spring, buffer, and rod and sleeve are housed in a casing secured to the body at the rear.

The sights used are the Flakvisier 35, and the Linealvisier 21, the former is of the reflecting-mirror type with a data-calculating mechanism; the latter is a direct antiaircraft sight embodying course, speed, and range adjustment.

The gun carriage consists of a firm under carriage and a revolving top carriage supported on ball bearings. The under carriage is leveled by three adjustable feet, and is provided with a spirit level. The top carriage has a cradle which is adjustable for elevation. The elevation handwheel is located on the right side of the top carriage, and the traversing handwheel at the back.

SPECIFICATIONS

Caliber         2 cm (.79 in.)
Length of tube
Weigth (travelling position) 1,697 lb.
Weight (firing position) 992 lb.
Length (travelling position) 160 ins.
Length (firing position)
Height (travelling position) 63 ins.
Height (firing position) 29 ins. mounted flush
Width (overall); (travelling position) 72 ins.
Width of trail spread
Length of bore
No. of grooves
Width of grooves
Depth of grooves
Width of lands
Muzzle velocity (H.E. shell) 2,950 f.s.
(A.P. shell) 2,624 f.s.
Max. range (horizontal) 5,246 yds.
Max. range (vertical) 4,012 yds.
Rate of fire 120 practical; theoretical 280
Traverse 360°
Elevation +90°
Depression -10°
Length of recoil
Ammunition H.E. (four types); A.P. (two types)
Wt. of 1 magazine of 20 rds 21 lb.

German: p. 135

Pz. Kpfw. 38 (t): Light Tank (Czech)

Pz. Kpfw. 38 (t): Light Tank (Czech)

This is the Czech tank L.T.H. The chassis of this vehicle is frequently converted by the Germans for use as a self-propelled mount for artillery pieces, such as the 7.5 cm. Pak 40 and 7.62 cm. Pak 36 (r) anti-tank guns, and the 15 cm. s.I.G. 33. The primary characteristics of the Pz. Kpfw. 38 (t) are its four large Christie-type bogie wheels of equal size; two top rollers forward; flat-topped turret with prominent cupola, and a square gun mantlet covering the whole front of the turret.

The turret is round with a square front. It has a traverse of 360° and an internal diameter of about 48 inches. Its floor does not revolve. The traversing gear, which is fast and light in action, is operated by a wheel on the left-hand side of the gunner. The bulge at the rear of the turret is fitted for ammunition storage.

All main construction is riveted with the exception of the top of the superstructure, which is bolted. The turret front has a basic armor of 25 mm with an additional 25 mm plate. The front vertical plate is similarly armored; the side superstructure armor is 30 mm in thickneses.

The suspension consists of four 30-inch diameter rubber-tired wheels on two bogies with half elliptic springs, a high front sprocket 22 1/4 inches in diameter and a rear idler. There are two return rollers mounted well forward. The track is of the outside center guide type, with single pin secured by circular clip.

The tank is powered by a Praga T.N.H.P.S. O.H.V. 6-cylinder, water-cooled, gasoline engine, rated 125 h.p. at 2200 r.p.m. The ignition is Bosch magneto.

The armament consists of a 3.7 cm. gun and one light machine gun coaxial in the turret, and one light machine gun in the front superstructure.

SPECIFICATIONS

Weight         10 tons
Length 15 ft., 3 ins.
Width 7 ft.
Height 7 ft., 2 ins.
Ground clearance 15 ins.
Tread centers 5 ft., 9 1/2 ins.
Ground contact 8 ft., 6 3/4 ins.
Width of track 11 ins.
Pitch of track 4 1/2 ins.
Track links 89
Fording depth 3 ft.
Theoretical radius of action
     Roads 140 miles
     Cross-country 100 miles
Speed
     Roads 26 m.p.h.
     Cross-country 18 m.p.h.
Armor
     Front plate 25 + 25 mm
     Sides 30 mm
Armament One 3.7 cm. gun
Two light M. G.’s
Ammunition (rds.)
Engine 125 h.p. Praga O.H.V.
Transmission 5 speeds forward, 1 reverse
Steering Epicyclic clutch brake
Crew 4

German: p. 18

Pz. Kpfw. III (Fl. W. 41): Flamethrower Tank

Pz. Kpfw. III (Fl. W. 41): Flamethrower Tank

The flame-throwing tank, put into service in 1942, consists of the standard Pz. Kpfw. III tank equipped with a flame projector instead of the usual tank gun. A machine gun is mounted coaxially in the turret and another is ball mounted in the front plate of the hull. Its road performance will approximate that of the Pz. Kpfw. III tank.

The flame tube, which looks like an ordinary cannon, contains 3 jets. The barrel behind the curved position of the armored shield is 134 cm long and at the flame end is 12 cm in diameter. Movement of the gun horizontally and vertically is controlled by two handwheels within reach of and to the left front of the tank commander. Propulsion of the liquid fuel for the flame thrower is achieved by means of a centrifugal pump driven by a small two-cylinder gasoline engine which is located in the engine compartment to the left of the tank motor. The fuel tanks are located beside the tank commander to the inside right and left side of the tank chassis.

SPECIFICATIONS

Approx. weight of vehicle in action         23.8 tons
Approx. weight of flame apparatus (with full tanks) 3,300 lb.
Approx. weight of flame apparatus (with empty tanks) 1,540 lb.
Number of flame fuel tanks 2
Capacity of flame fuel tanks 225 gals.
Approx. range (unignited) 55 yds.
Approx. range (ignited) 66 yds.
Maximum elevation of projector +20°
Maximum depression of projector -10°
Traverse of projector 360°
Approx. overhang of projector beyond front of chassis 1 ft., 7 1/2 ins.
Approx. overhang of projector beyond side of chassis 4 ft., 7 ins.
Fuel pressure produced by pump 240 lb./sq. in.
Type of pump motor Auto-Union ZW 1101 (DKW) with dynamo start
Type of pump Koebe
Performance of ZW 1101 motor 28 hp.
Approx. performance of pump 1.7 gals./sec.
Capacity of gasoline tank for pump motor 4 gals.
Capacity of mixer 2 gals.
Capacity of oil measure .08 gal.
Oil-gasoline mixture (used for pump motor) 1:25
Number of fire extinguishers (inside and outside) 5
Sparking plug for pump motor Bosch DM 225 T 1 or 175 T 1 or Beru 225 a1 or 190 a1
Sparking plug in projector Smitz-Kerze
Fording capacity 3 ft.
Batteries (2 vehicle batteries also used) 12 volts each
Low tension circuit 12 volts
High tension circuit for projector         up to 1,000 v. and 300 amps.

German: p. 30

Pz. Jäg. Lr. S. für 7.5 cm Pak 40/1 (Sd. Kfz. 135): S.P. Antitank Gun (on French Chassis)

Marder I: Pz. Jäg. Lr. S. für 7.5 cm Pak 40/1 (Sd. Kfz. 135): S.P. Antitank Gun (on French Chassis)

The French Lorraine tank chassis, in addition to being utilized as a self-propelled mount for the German 15 cm heavy field howitzer and the 15 cm heavy infantry gun, is also used for the high-velocity antitank gun, 7.5 cm Pak 40.

The Lorraine suspension arrangement consists of six small bogie wheels on each side, sprung in three pairs on three semi-elliptical springs. The driving sprocket is at the front, the track-adjusting idler at the rear, and four return rollers, located at the ends of the suspension springs, return the track, which is of the dry-pin type with outside center guides.

The power plant of this vehicle is the six-cylinder, in-line, water-cooled Delahaye engine rated at 70 hp. The ignition system is Bosch. Its main and reserve gasoline tanks hold 20 gallons and 5 1/2 gallons respectively.

The semi-automatic gun of monobloc construction is mounted within a high, open top, box-like shield, constructed of sloping 10 mm plate, well back on the chassis. The original gunshield overlaps the superstructure shield at the front. The gun is 134 inches in length and its muzzle with brake extends beyond the front of the chassis. The piece has the following muzzle velocities: H.E., 1800 f/s; A.P.C., 2525 f/s. Its appropriate elevation is -5° to +22°; traverse 65°. At 1000 yards, firing A.P.C. shell, it will defeat 3.6 inches of homogeneous armor at 30° obliquity, and 4.3 inches at normal.

SPECIFICATIONS

Weight         8 tons (approx.)
Length 17 ft. (approx.)
Width 6 ft., 2 ins.
Height 7 ft. (approx.)
Ground clearance 12 ins.
Tread centers 4 ft., 4 5/8 ins.
Ground contact 9 ft.
Width of track 10 ins.
Track links 107 (approx.)
Pitch of track 3 3/16 ins.
Fording depth
Theoretical radius of action
     Roads
     Cross-country
Speed
     Roads 21 m.p.h.
     Cross-country
Armor
     Front plate 12 mm
     Sides 9 mm
Armament 7.5 cm Pak 40
Ammunition
Wt. of Projectiles
     A.P.C. 15.0 lb.
     H.E. 12.6 lb.
Engine Delahaye, 70 hp.
Transmission 5 speeds forward, 1 reverse
Steering Controlled differential
Crew 5

German: p. 15

Pz. Kpfw. II Aus. F (Sd. Kfz. 121): Light Tanks

Pz. Kpfw. II Ausf. F (Sd. Kfz. 121): Light Tanks

Produced in 1941. This is the latest type of Pz. Kpfw. II tank identified in action. The major modifications appearing in this model are (1) increased thickness of the basic frontal armor, (2) new design of hull nose, (3) use of uninterrupted length of plate for front vertical superstructure plate, (4) use of dummy visor mounted alongside the driver’s visor.

The single skin nose of the Model F hull is constructed, of flat plates 35 mm thick with a Brinell hardness of 426 and is nearer vertical than the superimposed nose plate in the earlier reinforced models. This modification to the nose of the hull has shortened its length by approximately five inches.

The turret front and mantlet remain unaltered except for the omission of the additional plates and a corresponding thickening of the basic armor to 30 mm.

Model F is equipped with a new driver’s visor of the double shutter type. A dummy visor, a one-piece aluminum casting, is mounted alongside the driver’s visor on the right, presumably to draw fire from the latter.

The suspension arrangement of five bogie wheels and four return rollers is the same as that utilized in the previous models A, B and C.

The power plant consists of the HL 62 TR Maybach, a 6-cylinder, water-cooled gasoline engine rating 140 B.H.P. at 2600 r.p.m.

The transmission is of normal synchromesh, manual control type, providing six forward speeds and one reverse, and the steering system utilizes the epicyclic clutch and brake principle.

Armament comprises one 2.0 cm KwK 30 gun with coaxial 7.92 M.G. 34 in turret.

Models G and J have been mentioned in an official German document but there are no details available.

SPECIFICATIONS

Weight         10.5 tons
Length 14 ft., 9 ins.
Width 7 ft., 4 ins.
Height 6 ft., 6 ins.
Ground clearance 13 ins.
Tread centers 6 ft., 2 ins.
Ground contact 7 ft., 10 ins.
Width of track 11 1/8 ins.
Pitch of track 3 5/8 ins.
Track links 106
Fording depth 3 ft.
Theoretical radius of action
     Roads 125 miles
     Cross-country 85 miles
Speed
     Roads 30 m.p.h.
     Cross-country 15 m.p.h.
Armor
     Front plate 35 mm
     Sides 20 mm
Armament One 2.0 cm KwK 30
One 7.92 mm M.G. 34
Ammunition (rds.) 2 cm gun 180
M.G. 2550
Engine 140 B.H.P. Maybach HL 62 TRM
Transmission 6 forward speeds, 1 reverse
Steering Epicyclic clutch brake
Crew 3

German: p. 10

Sturmgeschütz lg. 7.5 cm Stu. K. (Sd. Kfz. 142): S.P. Assault Gun

Sturmgeschütz lg. 7.5 cm Stu. K. (Sd. Kfz. 142): S.P. Assault Gun

This version of the Sturmgeschütz is similar to its predecessor, the Stu. G. 7.5 cm K., except for its armament. The 7.5 cm Kw.K. short gun which appeared in the original Sturmgeschutz was replaced by the 7.5 cm Stu. G. lg. K., 87 inches long as shown above. The arrangement of the recoil mechanism also differs, the long version having what appears to be the original mounting provided for the Kw.K. 40 and is evidently a forerunner in its design and development. Photographs show the 7.5 cm Stu. G. lg. K. to be equipped at times with a muzzle brake. The front superstructure has been modified to accommodate the improved armament.

This vehicle is made up of the Pz. Kpfw. III tank chassis and an early development of the 7.5 cm Pak 40, and includes the hull and superstructure improvements made at this time on the original Sturmgeschütz. A roof was added, a commander’s cupola, smoke pot projectors and heavier front plate. The piece represents the trend in design from the short barrel 7.5 cm Kw.K. to the Stu. K. 40.

SPECIFICATIONS

Weight         21 tons
Length         17 ft., 9 ins.
Width 9 ft., 7 ins.
Height 6 ft., 5 ins.
Ground clearance 15 ins.
Tread centers 8 ft., 2 1/2 ins.
Ground contact 9 ft., 4 1/2 ins.
Width of track 15 ins.
Pitch of track 4 3/4 ins.
Track links 90
Fording depth 3 ft.
Theoretical radius of action
     Roads 100 miles
     Cross-country 60 miles
Speed
     Roads 25 m.p.h.
     Cross-country 15 m.p.h.
Armor
     Front plate 50 mm
     Sides 30 mm
Armament 7.5 cm lg. Kw.K.
Ammunition 84 rds.
Engine Maybach HL 120 TRM, 320 hp.
Transmission 6 speeds forward, 1 reverse
Steering Epicyclic clutch brake
Crew 4

German: p. 27